Technical parameter :
Flow :0-20m3/h;
Lift :30m;
Power :0.37-4kw;
Speed :1450r/min;
Caliber :10-100mm;
Temperature :-15-+150℃;
Self priming height :5-7m。
Product overview :
The new development and development of DBY type electric diaphragm pump, using XLD series cycloid needle wheel reducer drive power, electric diaphragm pump is a new type of pump. In recent years, because of the breakthrough in the diaphragm material, more and more industrialized countries have adopted this type of pump to replace some centrifugal pumps and screw pumps. It is used in petrochemical, ceramic, metallurgy and other industries. The design of the products refer to the prototype of American ABEL company. The pump is suitable for low pressure, that is, the outlet pressure is less than 3kgf/cm2.
Main uses :
1、Various highly toxic, flammable, volatile liquids.
2、A variety of strong acid, strong alkali, strong corrosive liquid
3、Medium with high temperature 150℃。
4、As a pre - stage pressure feeding device for all kinds of filter press .
5、Hot water recovery and circulation
6、Loading and unloading of oil tanks, oil depots and oil products
7、Pump pickle jam, mashed potatoes, chocolate, etc. 。
8、Pump paints, gum, pigment adhesives 。
9、Various porcelain glaze slurry cement grout slurry 。
10、Various rubber latex, organic solvents and fillers 。
11、Use pumps to clean up tankers and extract residual oil from tanks. 。
12、Hops and fermented flour pulp, syrup, molasses 。
13、Pumping sewage, sediment, and sewerage in mines, tunnels, tunnels, sewers 。
14、The absorption of a variety of special media 。
Technical parameter :
Flow :0-20m3/h;
Lift :30m;
Power :0.37-4kw;
Speed :1450r/min;
Caliber :10-100mm;
Temperature :-15-+150℃;
Self priming height :5-7m。